Ike FR4:
| Ihe | Nkọwa nka nka |
|---|---|
| Ụdị ihe | FR-1, FR-4, CEM-1, CEM-3, Rogers, ISOLA |
| Ọkpụrụkpụ ihe | 0.062 ", 0.080", 0.093", 0.125", 0.220", 0.047", 0.031", 0.020", 0.005" |
| Ọnụọgụ oyi akwa | 1 ruo 20 Layers |
| Oke.Nha bọọdụ | 22.00" x 28.00" |
| Klas IPC | Klas II, Klas III |
| Mgbanaka Annular | 5 mil/akụkụ ma ọ bụ Karịrị (Min. Imewe) |
| Mechaa efere | Solder (HASL), Lead Free Solder (L/F HASL), ENIG (Electroless Nickel Immersion Gold), OSP, Silver Immersion, Immersion Tin, Immersion Nickel, Hard Gold, etc. |
| Ibu ọla kọpa | Mpụta: Ruo 7oz, Ime: ruo 4 oz. |
| Chọpụta/Obosara Oghere | 3/3 nde |
| Oke mpe mpe akwa kacha nta | 12 nde |
| Oghere agbachie | 0.016" |
| Oghere kacha nta | 8 nde;4 nde |
| Mkpịsị aka ọla edo | 1 ruo 4 Edge (ọla edo 30 ruo 50 micron) |
| Ọnụ ego SMD | 0.080" - 0.020" - 0.010" |
| Ụdị Soldermask | LPI Glossy, LPI-Matte |
| Agba soldermask | Green, Red, Blue, Black, White, Yellow, Clear |
| Agba Legend | White, Yellow, Black, Red, Blue. |
| Obosara Ụzọ Opekempe | 0.031" |
| Akara (v-cut) | Ahịrị kwụ ọtọ, wụpụ akara, CNC V-CUT. |
| Ọlaedo | Ike, nro, imikpu (ihe ruru ọla edo 50 MICRON) |
| Ụdị faịlụ data | Gerber RS-274x nwere oghere ntinye. |
| Fab.Ụdị ihe osise | Gerber faịlụ, DXF, DWG, PDF |
| Akụkụ akụkụ | 10:01 |
| Counter Sink / Counter Bore | Ee |
| Mgbochi njikwa | Ee |
| Vias kpuru ìsì / e liri Vias | Ee |
| Ihe nkpuchi peelable | Ee |
| Carbon | Ee |
Ikike MC PCB:
| Ihe | Nkọwa nka nka |
|---|---|
| Ọnụọgụ nke akwa akwa | Otu akụkụ, akụkụ abụọ, oyi akwa anọ MCPCB |
| Ụdị ngwaahịa | Aluminom, ọla kọpa, Iron base MCPCB |
| Onye na-eweta laminate | Berquist, Ventec, Polytronics, Boyu, Wazam wdg. |
| Mechaa ọkpụrụkpụ osisi | 0.2 ~ 5.0mm |
| Ọkpụkpụ ọla kọpa | Hoz - 3 oz |
| Onye na-ebu ihe mkpuchi solder | Taiyo, Fotochem wdg. |
| Agba nke ihe nkpuchi solder | White, Black, Red, Blue, Yellow etc. |
| Ngwucha elu | L/F HASL, OSP, ENIG, Electrolytic Silver, Immersion Tin, Immersion Silver etc. |
| Ụdị nkọwapụta emechara | Ntugharị, Punching, V-cut |
| Ụta na tụgharịa | ≤0.75% |
| Nha oghere min | 1.0mm |
| Oke.osisi nha | 1500mmX610mm |
| Min.osisi nha | 10mmX10mm |