Ụdị TG PCB dị elu/ ahịrị nrụpụta PCB Flex / MPCB mmepụta
Nkọwa ngwaahịa
| Ihe | Ike | |
| 1.Base Material | FR-4 / High TG FR-4 / Ihe na-enweghị isi (ROHS kwadoro) / ihe halogen efu / CEM-3 / CEM-1 //ROGERS | |
| 2.Layers | 1-40 | |
| 3.Finished n'ime / mpụta ọla kọpa ọkpụrụkpụ | 1-6OZ | |
| 4.Finished osisi ọkpụrụkpụ | 0.2-7.0mm | |
| Ndidi | Ọkpụrụkpụ osisi≤1.0mm: +/- 0.1mm1 Ọkpụrụkpụ osisi>2.0mm: +/-8% | |
| 5.Max panel size | ≤2 akụkụ PCB: 600*1500mmMultilayer PCB: 500*1200mm | |
| 6.Min onye nduzi ahịrị obosara / oghere | Ime n'ígwé: ≥3/3milN'elu elu: ≥3.5/3.5mil | |
| 7.Min oghere nha | Oghere igwe: 0.15mmoghere Laser: 0.1mm | |
| Ịkụ ala nkenke: mbụ mkpọpu mmiri | Mgbapu mbupu: 1milMgbapu mmiri nke abụọ: 4mil | |
| 8.Min solder mkpuchi akwa | ≥0.08mm | |
| 9. Oghere ndidi | PTH: +/-3milNPTH: +/-2mil | |
| 10. E-ule ngafe pasent | 97% gafere na nke mbụ +/-2% (nnweta) | |
| FQC-ụlọ nyocha anụ ahụ: Nnwale ntụkwasị obi | ||
Ihe ngosi ngwaahịa
Anyị na-emepụta PCBS maka ndị ahịa anyị na-arụ ọrụ ugboro ugboro site na ngwaahịa LED ruo nzikọrịta ozi na ụlọ ọrụ dị iche iche dị ka ngwaọrụ ahụike site na ụgbọ ala, ikuku ikuku wdg.
Ọrụ anyị
Anyị nwere ike ịnye gị ọrụ eletrọnịkị kacha mma.
Ọrụ mmepụta PCB.(FR-4, HI-TG, Aluminom, FPC, TEFLON, Rogers, CEM-1)
FPC, PCB Copy Service.
Ọrụ Mgbakọ PCB.(SMT, BGA, DIP)
Mmemme IC nwere faịlụ HEX.
PCBA Housing ọrụ mgbakọ.
Nnwale arụmọrụ ikpeazụ PCBA.
PCBA Copy Service.
Ngwa Eletrọnịkị Ịzụta & Ọrụ Ịzụta Ndepụta BOM.
PCB SMT Stencil.(Laser cut & Etching)
Mgbakọ USB
Dee ozi gị ebe a ziga anyị ya
